Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Paint and Body (https://www.lateral-g.net/forums/forumdisplay.php?f=52)
-   -   Roof Skin??? (https://www.lateral-g.net/forums/showthread.php?t=24656)

boynton6spd 01-12-2010 08:08 AM

Roof Skin???
 
I'm thinking about picking up a 69 Firebird CHEAP in my area...

I have a few questions.

It need some fairly common patch panels;Rear Quarters, Rear Fenders, 1 lower door and Trunk.
I'm willing to go for it at that.
What has me very concerned is it needs a new roof skin...
and the front lights are in place with BONDO!!!!

Does this put it into a MAJOR Cost factor.
How much work is a new roof skin and sorting out the grille and headlight buckets. I wish is was a 67-68...their front ends look so much better!
I have an excellent painter with very fair prices, but I think this might be more than I want to deal with.

marks914 01-12-2010 08:32 AM

Sounds like it is a gonner, just wait until you see the one you want. I have made the mistake too many tomes of buying something that is just too far gone and would have been better off buying a better car for a couple hunderd bucks more.
As for the roof skin, its alot of work, but manageable.
Mark

67rstbkt 01-12-2010 11:37 AM

It will most likely be worse than you think. I thought I could get away with less on my build, but here I am with an almost new car. The PO filled all the rust spots with bondo. If the headlights are held in with bondo, chances are there's a lot more on that car. Check out my build, it will give you an idea of what's involved.

Ron Fox 01-12-2010 11:53 AM

Any photo's of the '69 Firebird?

boynton6spd 01-12-2010 12:52 PM

I'm going back over this weekend to take a few pics,
 
I'll post over the long weekend.

elitecustombody 01-12-2010 01:21 PM

AMD makes alot of parts,if you need a quote,let me know,I can get pretty good deals on AMD sheetmetal

boynton6spd 01-13-2010 10:02 AM

Quote:

Originally Posted by elitecustombody (Post 260958)
AMD makes alot of parts,if you need a quote,let me know,I can get pretty good deals on AMD sheetmetal

Stephan, I really apreciate the offer, but I'm going to pass on this car...
I will call you about part for my 67 Impala though...
-Matt


All times are GMT -5. The time now is 10:59 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net