Fikse In Stock Specials While They Last
 

Fikse in Stock Specials, Additional 10% off until they are gone.

Fikse found a number of wheel centers already machined, finished and ready to assemble in the width and BS you need.

Here is what we have and some example pricing below.

This discount ONLY applies to in stock wheels

GM Pattern, 5 X 4 3/4

17” Classic Aro — Bronze Anodized*

17” Classic FM/5 — Gold Anodized*

18” Profil 5 - Technipolish

17” Profil 13 — Technipolish

17” Profil 5 — Technipolish

Ford / Mopar, 5 X 4 1.2 Pattern

17” Classic Aro — Race Anodized

Also for your DD

Porsche

17” Classic FM/10 - Technipolish

18” Classic Mach V — Technipolish

18” Profil 13 (center cap delete) — Race Anodized

19” Profil 5S — Technipolish

Audi

17” Classic FM/5 — Technipolish

17” Classic Aro — Technipolish

18” Classic FM/5 - Technipolish

BMW

17” Classic FM/10 - Gold Anodize*

17” Classic Mach V — Vintage Jewell*

18” Classic FM/10 - Full Polish

19” Profil 5 — Full Polish

Corvette

17” Classic Aro — Bronze Anodized*

17” Classic FM/5 — Gold Anodized*

18” Profil 5 - Technipolish

Mercedes

17” Profil 10 — Race Anodized

Mazda (RX-7)

17” Classic Aro — Speed Silver*

We can build these in alsmost any width or Backspace.

Some example pricing

Lets do those Technipolish Profil 5 18s we have listed

Do them:

18 X 8 and 18 X 9.5 (Camaro fitment), New 10% Lower Fikse Price is $4064, take a additional 10% for in stock makes them $3650!

or

18 X 8 and 18 X 12 (Camaro fitment), New 10% Lower Fikse Price is $4346, take a additional 10% for in stock makes them $3900!

Or lets do the 17" Profile 5 or 13 we have listed

Do them:

17 X 8 and 17 X 9.5 (Camaro fitment), New 10% Lower Fikse Price is $3160, take a additional 10% for in stock makes them $2850!

or

17 X 8 and 17 X 11 (Camaro fitment), New 10% Lower Fikse Price is $3312, take a additional 10% for in stock makes them $2980!

That was quick, Congratulations Tom! you know a deal when you see one.

Does this work for my application?

Know what, they list some Profil 5 for Corvette, let me check into that.

Stay tuned. Wouldn't be cool to save another 10%

Damn and i just spent most of my car fund need to save....Damn

Any polished FM/5 18" GM Bolt patterns avail?

Rybar, I am going to talk to him them some more today and see what they dig out. Maybe there is a set that needs to be finished and they could polish them up?

I got a set of Technipolish FM/5 for you

Congratulations Rybar! Cannot wait to see them on your car.

We sold a few sets already and found some more centers.

NOTE, the Corvette stuff is 5 X 4 3/4 but has a .03 to small center bores for a early GM. But a little touch with a burr bit or mill (prefered) and they will fit.

Corvette

17” Classic Aro — Bronze Anodized

17” Classic FM/5 — Gold Anodized

17” Classic Mach V — Speed Silver

17/18” Classic FM/10 — Opt. Paint (Staggered)

17/18” Profil 5 — Technipolish (Staggered)

17/18” Profil 13 — Opt. Paint (Staggered)

18” Profil 5 — Technipolish

18” Profil 10 — Opt. Paint

18/19” Profil 5 — Opt. Paint (Staggered)

18/19” Profil 5S — Black Anodized (Staggered)

Camaro

17” Profil 13 — Technipolish

17” Profil 5 — Technipolish

17” Classic FM/10 — Opt. Paint

17” Classic FM/5 — Opt. Paint

17/18” Profil 5 — Technipolish (Staggered