69 Camaro seat install help Please!
 

Trying to put 2000 Pontiac Trans Am seats in a 69 Camaro. Any sugestions?

use the search 4th gen seats, there are numerous posts on here about this. i have them in my 69 camaro.

It involves some cutting and welding.

Front holes line up. For the rears you can cut and reposition them to fit or use some 1/4 plate and make adapter plates (for new and old holes). They are very comfortable.

Thats a good answer:thumbsup:

Thanks!
 

You guys rock! Thanks I will try it.:thumbsup: :thumbsup:

Be sure and use grade 8 hardware also.

When I did mine I used 1 & 1/2 angle iron (1/8") for the rear feet. Nice and sturdy and easy to weld to original brackets. I just cut the rear feet off (they are off-set the wrong direction) and placed a block of wood under brackets to then mock up about 2" long angle irons and tacked in place before pulling off to finish welds.

Seats!
 

Thanks sound like all are good ideas!