good parts need some tlc
 

Aeromotive pro series fuel pump, needs a rebuild. - $100 OBO

Aeromotive Fuel pump controller, perfect condition - $200 OBO

MSD 6BTM, great working condition - $250 OBO

Innovate LC1, may need a new sensor - $75 OBO

Wilwood SL6R calipers, these will perform like new, but appearance wise they are not great, couple blems and the powder coat on one of them is damaged from brake fluid, mostly on the back half but the front has a few dull spots too, over all i give the looks 4/10 for one and 7/10 for the other. PN 120-8000 and 120-8001. they were front mount originally but the bleeders were switched. can be switched back fairly easily. - $300 OBO
no pads... forgot to take them out of the picture

Located in Ft. McMurray AB, canada.

I take it the calipers are for the rear,do they come with any hardware? do they require shims or some sort of spacers and brackets/adapters?

yes you will have to purchase brackets for your application, the brackets will come in a kit that includes required hardware and spacers. the bleeders are switched so that this caliper mounts towards the front half of the wheel but can be switched around. the rest of the specs are on wilwoods website. PN 120-8000, 120-8001