Lateral-g Forums - Rear End Width

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)

- - Rear End Width (https://www.lateral-g.net/forums/showthread.php?t=28773)

Chicken Louie

10-01-2010 05:27 PM

Rear End Width

Could some one please confirm what the measurement should be for flange to flange for a ford 9 inch for a 67 bird with a 18x10 rim and a 4.875 backspace???

Thanks

ProdigyCustoms

10-01-2010 08:43 PM

58" axle flange to axle flange should be close but your in for a tight squeeze with 10" wheels on a 67.

Chicken Louie

10-02-2010 07:03 AM

Thanks Frank,

Quote:

Originally Posted by ProdigyCustoms (Post 308585)

58" axle flange to axle flange should be close but your in for a tight squeeze with 10" wheels on a 67.

The car is going to be tubbed, so I should have some extra room. I might have come across a narrowed rear end that is 56" and was wondering if it would work. I can't get to my car till sunday to take any measurements.

Blake Foster

10-02-2010 02:04 PM

do your self a favor and put the wheels with the tires on them up in place and then measure! DON"T GUESS!

All times are GMT -7. The time now is 12:57 PM.