anyone put 5" autometer gauges in a stock 69 camaro dash
 

i have the autometer console pod and i am looking to move my big in dash fuel gauge to a 2 1/16 console gauge. in its place i want to go with a 5" tach in the dash then match it up with a speedo. i have seen this done in the 67 and 68 camaros but not in a 69 due to the kinda square gauges. can anyone give me some insight on this subject

There was a guy on camaros.net who had done exactly that as I recall. I will see if I can find it and post a link...

I can say (just my opinion) that it looked a bit odd since the 5" diameter of the guage is significantly larger than the square cavity...

gauges
 

im just thinking that the 3 3/8" are going to be to small

I have seen it done but doesn't look right with a round peg in a square hole.

Mike

gauges
 

would the 3 3/8 look better than the 5" i am just trying to avoid the aftermarket dashes and work with my original one

Have you looked into Covan's dash insert?

The real trick thing to do is to use the 69-74 nova dash insert from covans and the nova dash pad, this gets rid of the odd shapped camaro dash and gives you a nice flat surface to work off...much cleaner looking!!

I have a Covan's insert in my 68 Camaro...nice product. :thumbsup:

gauges
 

yeah i hvae seen those and i like the way they look. but i am just a poor ole college student and am trying to use what i already have

I did it to mine.
 

I put the 5" gauges in my Camaro. I have pictures of the modifications that I did, but unfortunately I haven't been able to get my website back online since I moved back home to Rural America.

I made plates that mounted in place of the stock plastic lenses and mounted the gauges to them. Since the dummy lights, turn signal and high beam indicators are in the stock lenses, I used little LEDs in place of them. I don't think that it looks bad.

Michael

gauge
 

so you took out the peice that has the lenses and the dummy lights and just didnt use it again and mounted the 5" gauges to a plate that took the place of the square stock gauges. how did u mount the leds.....man iwish i could see a pic or multiple pics.. do you have a digital camera you could just email some ot me u kinda got me confuesd and pics would help....how much of the actual dash did u have to cut or modify or was it all to the lenses

gauges
 

overkill you do have a 69 right