New Redline gauges available now!
 

Finally finished up the dials and we are ready to roll.
We have the 6 gauge sets available with your shoice of aluminum or stainless bezels. We are going to run the extra gauges once we get a feel for what folks need (oil temp, boost, arf, etc..)

The spun metal look ia a cross between american muscle, cobals and nexus gauges. The 2-1/16" gauges feature peak hi/low warning and recall.
The integrated LED through-the-dial lighting has user selectable white or amber lights (whick look kind of red) We also took the liberty of toning down the lighting on the hash marks a bit, earlier versions were just too bright.

These will be available for a limited time at $569 when purchased through our store, the regular retail price will begin in a couplel of weeks. Just wanted to give all of you a chance at a great deal on a great, new style of instruments.

Thanks for your help over the past few months!

Mark

PS the 3-1s are just about wrapped up, we have all of the parts on order, just waiting for them to show up.

heres some pics:
Stainless bezel:
http://inlinethumb19.webshots.com/18...425x425Q85.jpg
Aluminum bezel:
http://inlinethumb64.webshots.com/46...425x425Q85.jpg
White LED lighting:
http://inlinethumb53.webshots.com/39...425x425Q85.jpg
Amber LED lighting:
http://inlinethumb16.webshots.com/48...425x425Q85.jpg

I'm going to be buying a set of these in a few months as money comes in. The warning lights are an awesome feature.
The only extra gauge I would need (in addition to the normal 6) is oil temp.

lookin' good!! Can't wait to see your 3 in 1's!!

Yes we will have:
Oil temp
Nitrous pressure
vac/boost
trans temp
air-fuel ratio, narrow and wideband
fuel pressure 100 psi
Im probably missing something, but pretty much everything will be available
Mark

Is it possible to add turn signal indicators, high beam indicator, and check engine light in the face of the speedo/tach?

We might be able to install a couple of LEDs on the dial, but not the way we do them on our Woodward gauges, just not much room in there.

Mark

A good way to to that is with our indicator gauges:
http://inlinethumb23.webshots.com/15...425x425Q85.jpg

http://inlinethumb08.webshots.com/35...425x425Q85.jpg

or with our indicator panels:
http://inlinethumb35.webshots.com/35...425x425Q85.jpg

Just an update, we now also have 2-1/16" stepper motor gauges with the following functions:
Vac/boost
Oil Temp
Trans Temp
A/F ratio wide and narrow band
Nitrous pressure
Fuel pressure
EGT

We have them in the redline and 69 series

redlines:
http://www.newvintageusa.com/redline.html

69 Series:
http://www.newvintageusa.com/1969.html

Working on the 5" gauges, but the 3-1s are kind of taking most of our time.

Mark