Lateral-g Forums - Baer 6S - front big brake

Selling my Baer six piston front
big brake setup.

Calipers are new, brackets are new,
2 piece rotors have around 250 miles

price is $2K for the 6S calipers and
brackets only.
Can be used with 13.5" - 15" rotors

price is $2700 for the calipers,
brackets, 15" Baer 2 piece rotors
you would need braided lines and pads

price $3K for every thing, calipers, rotors
new Ferrodo pads, new braided lines,
new banjo fittings, ect.

These are the same calipers that Trans Am Series road race teams won 7+ Championships with,
the calipers are hard case anodized so you don't have to worry about paint flaking or chipping off.

This is a very serious no nonsense big brake and will work with ATS spindles, Core brake adapters for Corvette C5, C6, base and Z06 application and will also fit any other derivative set up that you can run C5 or C6 brakes on.

I have yet to see anyone else on here with 15" rotors, so if you been wanting the best of the best here is your chance!!!

For additional money I also have new pair of C6 front knuckles.

Here is a link to info on Baer brakes
http://www.lsxtv.com/forum/baers-c6-...eme-1381.html#

Actual pictures of the parts
http://i31.photobucket.com/albums/c3...rbrakes001.jpg
http://i31.photobucket.com/albums/c3...rbrakes003.jpg
http://i31.photobucket.com/albums/c3...rbrakes007.jpg
http://i31.photobucket.com/albums/c3...rbrakes005.jpg
http://i31.photobucket.com/albums/c3...rbrakes006.jpg

rotors are 380mm x 32mm
or 15"x1.25"
http://i31.photobucket.com/albums/c383/69TA/008-2.jpg