Lateral-g Forums - Mixture of Camaro 1968 and corvette C4!!

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)

- - Mixture of Camaro 1968 and corvette C4!! (https://www.lateral-g.net/forums/showthread.php?t=2976)

Mixture of Camaro 1968 and corvette C4!!

Is it anyone here that had put a first gen camaro on a corvette C4 chassis??

My first plan in my new project was to only use the complete rear end from a C4 and build a complete new tubeframe but now im starting to thinking of use a complete frame from a C4!! Is it anyone who have done this before??
Or maybe its not even possible!! Oh...!! Yeah...of course!! Everything is possible!! :D :cool:

Tyler Beauregard's American Touring Specialties Project 50/50.

i think thats basically what your asking.... except its a C5 corvette instead of a C4.

Quote:

Originally Posted by ill steez

Tyler Beauregard's American Touring Specialties Project 50/50.

i think thats basically what your asking.... except its a C5 corvette instead of a C4.

There are fairly major differences between the C4 drivetrain (engine mounted transmission, drive shaft and (basically) a four link IRS rear) and the C5 drivetrain (differential mounted transmission, torque tube, UCA/LCA rear suspension). In addition, I think Tyler Beauregard is adapting the drivetrain (but not the chasis) to a first gen, using a Wayne Due subframe and an extensively modified body.