need a drive shaft
 

Need drive shaft advice. I have a LS2 in a 69 Camaro with a 4L60E.
Any advice on length and cost?

Driveshaft
 

Hello TMadden,
I'm working on my 69 Camaro myself and on an extreme budget. I just installed a TKO 600 behind a 454 BBC.
I saved a bunch by buying the pieces seperately on ebay.
C6 / TKO Spicer Yoke $60
DynoTech 4" Driveshaft 46 1/2"L $24.99 (used on a Nascar race car and included a billet TH400 Yoke).
New 1350 U-Joints $37.00

Total for under $125

You can find any length driveshaft 41" to 47 1/2" on a daily basis.
Hope this helps.
Marco

Driveshaft
 

Hello TMadden,
I'm working on my 69 Camaro myself and on an extreme budget. I just installed a TKO 600 behind a 454 BBC.
I saved a bunch by buying the pieces seperately on ebay.
C6 / TKO Spicer Yoke $60
DynoTech 4" Driveshaft 46 1/2"L $24.99 (used on a Nascar race car and included a billet TH400 Yoke).
New 1350 U-Joints $37.00

Total for under $125
I can probably get about $40 for the yoke that came with the driveshaft so total cost under $100.

You can find any length driveshaft 41" to 47 1/2" on a daily basis.
Hope this helps.
Marco