Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)
-   -   mechanical speedo directions for T56 (https://www.lateral-g.net/forums/showthread.php?t=29960)

TChance69 12-23-2010 11:40 AM

mechanical speedo directions for T56
 
Hey guys looking for directions for the mechanical speedo mod for my T56. I have searched several wordings and have been unsuccessful. Thanks Tom

JamesJ 12-25-2010 05:02 PM

I dont understand what you are asking?

Are you looking for the name of the box that takes the electrical impulses and then converts it to a manual cable?

You just looking for more info about options?

I send my gauge to Red Line and they made it an electrical one cost was about the same as the box and dont have to have that bulky thing are route the hard cable.

TChance69 01-09-2011 04:27 PM

what i mean is there is a modification to convert my tail housing from electrical to mechanical. you can machine it but i don't have the exact placement of where the cable comes into the tail shaft housing. i have access to a mill but don't have the cad directions. thx tom

dhutton 01-09-2011 04:51 PM

I think that jagsthatrun.com sells a conversion tailhousing.

Don

TChance69 01-10-2011 12:01 PM

Thanks! I checked that web site out and they didn't have anything for the
t56. They had a bunch of things for automatics but very limited stuff for the t56. Thanks for the thought.

dhutton 01-10-2011 01:30 PM

Quote:

Originally Posted by TChance69 (Post 326168)
Thanks! I checked that web site out and they didn't have anything for the
t56. They had a bunch of things for automatics but very limited stuff for the t56. Thanks for the thought.

Shiftworks has one:

http://www.shiftworks.com/tailhousing.htm

Don

TChance69 01-11-2011 10:15 AM

I know that I can buy the housing itself. I wanted the cad drawing or directions how to do it myself. I have access to a mill. I just need the directions. I could guess where to put the opening for the gears but, I know that there is a cad drawing out there. Would be willing to pay for them as well.


All times are GMT -7. The time now is 05:43 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net