ECU Placement and Clean Wiring
 

I have a 69 Camaro with an LS6. I am using a Painless harness for the conversion and also to upgrade the rest of the car. Where are most of you placing the ECU?

I am also looking for tips to keep the engine compartment neat and clean from visible wires and hoses. Do any of you guys have tips or methods you can share?

I mount the ECM inside under the dash- I run the bundle of wires to the back pass head and run the monster hole through the trans tunnle- just behind the firewall- good luck:D

check it out
https://lateral-g.net/forums/show...t=ecm+mounting

We sell quite a few different brackets to help with this installation. There are alot on my website in the lower section of the gallery.

www.ironworksspeedandkustom.com

You can email me with more questions
[email protected]