|
icemanrd19 67 camaro
3 Attachment(s)
https://scontent.xx.fbcdn.net/v/t1.0...05&oe=5953B3F6
Well about 3 or 4 months ago i bought a 1967 Camaro from a guy in fort worth. Well Replacing a few nuts and bolts led me to ripping alot of the car apart. Currently the car is sitting apart and im trying to figure out what direction i want to take it. I need some help with the steps of fixing this car up the way i want it. I stopped last month bc i felt like i was probably going to do things to the car that i would end up having to take back off so in essence wasting my time. Exterior 2002 plymouth prowler orange Marquez billet taillights P/N 103-bc DSE selecta - speed wiper kit P/N 121001 wired into stock fuse box Ringbrothers black air frame 20679-1032 hood hinges Stock hood latch painted black Forgeline rims 18x9.5 and 18x11 polished outers titanium smoked centers, Fronts 28.58 offset, hub 70.3, rears 25.4 offfset and 70.3 hub 315/30/18 and 275/35/18 michelin ps2 tires Dse mini tubbed Dse subframe connectors Ridetech billet gas cap RS lower valance with new lights tinted black Stock 68 camaro mirrors mr-27 and mr-26. First hole is drilled 1 inch up and 8 inches back on the door 68 camaro rs kit with Retro - Electro PN-002 RS Electronic Headlight kit New rear quarters, trunk, tailpan, hood, roof, floor, dash, and radiator support New door handle kit part # dw-60p New rear bumper Smoothed firewall aluminum hood strikers Suspension and Brakes 2012 corvette z06 6 piston calipers with 6 puck pads and 4 piston rear calipers with stock rotors Kore 3 rear parking brake kit1988-1995 corvette rear ebrake cables ac delco part number 19143763 67 camaro big block intermediate cable pbk-11r front cable pbk-10a, New e-brake, Drill out the kore 3 bracket to 9/16" Hydroboost unit with wilwood Master cylinder street quality P/N 2021-STP Dse front subframe P/N 032006 Dse rear quadralink P/n DS-041703 with ridetech single adjustable shocks ford 9" moser custom alloy 31 spline axle shafts torino flanged OD 6.9 or less/ press on bearings 1/2"-20x 3.00" studs press in GM 5 of 4 3/4 bolt circle, 1/2" pinion offset "f" measurement 25.375?""g" measurement 24.375" Total axle width 54/750 axle flange to axle flange moser 9" ford complete 3rd member Truetrack 31 spline Diff n-case daytona aluminum pinion support 1250 yoke w/u-bolt 4.11 gear ratio Wilwood proportioning valve 260-11179, wilwood master cylinder and hydroboost Chassisworks tunel kit P/N 5922-f10 Dse aluminum body bushings Interior Eddie motorsports black steering wheel launch MS140-54BK Morris Classic concepts 3 point setbelts American autowire kit Dynalined and Dynamat entire metal part of the car Rear sony 6x9s using the speaker covers as a spacer Kick panels with speakers New stock 67 dome light New stock 67 rearview mirror 69 camaro rear quarter outer felts with the flag TMI one piece suede headliner recaro seats with suede middle inserts County prison white shift knob P/N sk502-cpbk-6rur on a Finch 6" shifter P/N 7000461-n New rear quarters, trunk, tailpan, hood, roof, floor, dash, and radiator support Vintage air unit with modified DSE vintage air bracket P/N 011006 dw-20 door mechanisms cpt-07p fisher logo sill plates bm-1048 quarter glass vertical moldings dw-27 window cranks ws-09 u-jamb seats gb-16 glove box door bumper set rsp-11bk black mesh package tray DJ-100 windsock end caps Engine vaporworx fuel tank with notched corners with 2012 camaro fuel pump T56 reverse lockout from wire barn t56-CON Billet specialties 77109 overflow tank PRC dual pass radiator 211001 and spal fan setup ls3 480hp rated at 495 with hotcam t56 magnum/ ls7 clutch Afco dynatech 2.5 exhaust 793-91125 Holley black fuel rails p?n 534-209 Finch performance gas/diff dual vent system Kwik Performance P/N k10143 air conditioner bracket kit autocraft oil pan Corvette accessories 19257325 Elite Engineering Catch can CC-200B PCM of NC p-150028 A/C fan speed bump circuit and PCM of NC Hi/Lo speed Fan Kit DSE battery relocation kit stainless works headers part number ca679wd 1.75 primaries and 3" slip fit collectors dse motor mounts 060401 ws-18 cowl hood to vent seal ws-47 cowl vent wedges Part # ws-05 trunk weatherstrip Part # ws-19 67 OEM window felt set lic-15 license plate bumper set http://i30.photobucket.com/albums/c3...d19/photo5.jpghttp://i30.photobucket.com/albums/c3...d19/photo4.jpghttp://i30.photobucket.com/albums/c3...d19/photo2.jpghttp://i30.photobucket.com/albums/c3...d19/photo1.jpg |
THis is exactly how i want my 67
http://i30.photobucket.com/albums/c3...9/efc7cfa2.jpghttp://i30.photobucket.com/albums/c3...9/1d6705f6.jpghttp://i30.photobucket.com/albums/c3...9/c6f6b540.jpghttp://i30.photobucket.com/albums/c3...9/86036004.jpghttp://i30.photobucket.com/albums/c3...9/4be6c498.jpg THis was my old project but ive grown up now to bigger meaner toys :) http://i30.photobucket.com/albums/c3...9/DSCF1368.jpg |
Nice Car:thumbsup:
My opinion is to keep it driving. I would start with the mini tubs, and rear suspension (my choice is DSE) Then put back on the road. Keep upgrading it as you go. My personal experience is that my car has been in the shop stripped right down, I am not able to drive it because I cannot afford to do everything I want to do all at once. Just my .02 |
well in order for me to drive it again i need to rewire the entire car. I dont feel like ripping all the wiring out and doing it all over again. Thats my dilemma. Plus i need to smooth the firewall out and in order to do that ill probably have to pull the motor.
|
[QUOTE=randy;334398]THis is exactly how i want my 67 Then you should have bought a 69:lol: Sorry but I had to, after u posted the photo of a 69. Youll be in good hands around here and many will give you helpful advise.:thumbsup:
http://i30.photobucket.com/albums/c3...9/efc7cfa2.jpghttp://i30.photobucket.com/albums/c3...9/1d6705f6.jpghttp://i30.photobucket.com/albums/c3...9/c6f6b540.jpghttp://i30.photobucket.com/albums/c3...9/86036004.jpghttp://i30.photobucket.com/albums/c3...9/4be6c498.jpg |
Can i get some opinions about the G link setup with mini tubs? I understand dse is suppose to be the best but how does it compare to G link and price wise?
|
cool project!
there are lots of options for suspension and subframes out there. I've learned so much from the Lat-G gang. I am a big fan of DSE, Art Morrison and I really like dealing with the Speedtech boys. enjoy the process:D |
what should i expect to pay for a quality 4 link and rear end setup? Should i go with the 12 bolt gm or 9" ford? why one over the other? sorry im a newb when it comes to this type of stuff
|
Quote:
Some update photoshttp://i30.photobucket.com/albums/c3...9/ac043930.jpghttp://i30.photobucket.com/albums/c3...9/1b7fd360.jpg http://i30.photobucket.com/albums/c3...9/90563f1f.jpg http://i30.photobucket.com/albums/c3...9/0adab971.jpg http://i30.photobucket.com/albums/c3...9/f40958fc.jpg http://i30.photobucket.com/albums/c3...9/765187ad.jpg http://i30.photobucket.com/albums/c3...9/487a8713.jpghttp://i30.photobucket.com/albums/c3...9/31cd482d.jpg |
| All times are GMT -7. The time now is 04:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net