Cleaning the garage (Budnik wheels, 69 suspensions parts, etc)
 

*****All parts were sold locally as a package, please close thread*****

All the parts are located in San Antonio, TX. Here is a list of the parts that I purchased for my 69 camaro and will not be using as I'm running the Jakes Rod Shop front subframe setup, these are the actual cost I paid and have receipts for everything. If you want i'll take 25% off my cost or best offer:

New Parts

Helix upper control arms $315
Helix lower control arms $315
Shipping $65
Total $695

Front springs $150 + $20 shipping (hotchkis)

Hotchkis Front sway bar $185 + $35 shipping

Airride Tall drop spindles $300 + $25 shipping

Front shocks Chris Alston Engineering (Varishocks) $300 + 15 shipping

GM SS Hub Kore3 adapter for the C6 brakes $299

Budnik wheels and tires - new, just used for mockup 18x8.5 front 18x11.5 rear (purchased from Felser off this site) $2200

Used

4 Corvette z06 tires $300
3700 miles Goodyear Eagle 1 GS2 EMT Runflat
285/35ZR19 Rear
245/40ZR18 Front

The stock subframe, front and rear suspension and brakes - best offer

Give me a ring if your interested 210-313-2117

-Chris

Can you post the part # for the varishocks and springs please?

Hmmmm...Budnik sure makes a lot of different wheel styles don't they?
:ttiwop:
GLWS :thumbsup:

pics of the control arms please

GM SS Hub Kore3 adapter for the C6 brakes $299
interested in these and the wheels.
please post pic.

Jay, I'm currently in the Midwest helping out with the tornado relief for the insurance company I work for, but will be flying home on the 24th. I'll get all the specifics then, I'll also shoot Frank @ prodigy an email to see if he still has that on file, since they were purchased from him. I don't remember off hand, but they were recommended by Frank for a pro-touring set up.

I'll get you actual photos when I fly home on the 24th or if your in the San Antonio area my builder has a key to the storage unit and can let you check them out.

I tried to go onto their website www.helixsuspension.com they don't have a pic for that model year, but they look just like the one on their homepage when you click on control arms.

I'll get some more photos of the wheels and tires in my storage unit when I get back, I was able to find some pics from when I purchased them from Chris Fesler a while back. They were used for mockup by Chris, however i've never even put them on my car as the tubs have not been installed.

https://lh3.googleusercontent.com/_6...0/untitled.jpg

https://lh4.googleusercontent.com/_6...beY/s720/2.jpg

https://lh4.googleusercontent.com/_6..._Ks/s720/3.jpg

https://lh5.googleusercontent.com/_6...8FI/s720/4.jpg

https://lh4.googleusercontent.com/_6...Ecg/s720/5.jpg

https://lh6.googleusercontent.com/_6...IFc/s720/6.jpg

Interested in the swaybar and shocks left a message on the number you posted Thanks

Due to the high interest in the wheels, I had a friend go by and get the specs, he also took some photos, however the resolution was set pretty high, so it would be best to email. I will be home on Tuesday to get additional photos and can start packing up all the items pending sale.

FT TIRE 245/35ZR18 REAR 315/30ZR18 MICHELIN PILOT SPORT WHEEL ARE BUDNIK FT 8 1/2 WITH 5IN BACK SPACE REAR 11 1/2 WITH 7 1/2 IN BACK SPACE

Thanks guys! :lateral:

-Chris