Has anyone...
 

.... installed a B&M shifter into a stock camaro center console?

I put one into my 'Bird console years ago, same difference. Bolted in with no problems... Should be a piece of cake if you got the right shifter.
Mark

which shifter did you use? i have ... oh crap... not the quick silver, and not the cheap Zgate... ahhh crap... aw hell, i think its the hammer.

Max I put the B&M Hammer in my stock console. I just cut the base down and then added clips to the inside that hold it down to the console plate.

Scott

https://lateral-g.net/members/hall/5.jpg

https://lateral-g.net/members/hall/PICT0091.JPG

I used the B&M Mega Shifter...
http://www.bmracing.com/media/products/items/7_full.jpg
I got the kit designed for the console cars and it bolted right in.

thats it, the mega-shifter... what kit did you get? it is much different than the standard mega-shifter?

The kit is designated as a "console" model. It's about 10 bucks cheaper then the "floor" mount model because it doesn't include the black box you see in my attached photo. :D Watch eBay... They can be had for a good price there and Summit or Jegs has them for 160 or so...
Mark

Shifter
 

how does the mega shifter compare to the quicksilver...which is easier and smoother to shift...i like the idea of no levers in the quicksilver...do yall reaslly like the mega shifters alot..is it hard to get into the gears manually say like in a racing application

the only difference i can tell between the two, and yes i've had both of them, is that the quicksilver doesnt have the pull release mechanism. To get it out of park you have to pull up on the entire handle and then it plops down into gear.

Shifter
 

in you opinion which is your favorite for a performance street application and look