Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)
-   -   Turbo 400 Question (https://www.lateral-g.net/forums/showthread.php?t=32277)

64impala 06-08-2011 11:51 AM
Turbo 400 Question
 
So I Bought A Turbo 400 From A Buddy. We Drained The Oil And It Was Super Clean. It Looks Like It Was Rebuilt Because The Paint Looked Good, The Seal Looked New, And The Fluid Was Clean. Queastion Is Should I Just Refill It And Run It? I Even Have A 2600 New Converter For It. If I Dont Need To Go Through It I Wont But I Need Some Input. Thanks:d

MarkM66 06-08-2011 01:51 PM
What engine are you putting it behind?

64impala 06-08-2011 02:26 PM
Quote:
Originally Posted by MarkM66 (Post 353056)
What engine are you putting it behind?
454 in a 64 impala

knucklebusted 06-23-2011 07:57 PM
Quote:
Originally Posted by 64impala (Post 353025)
So I Bought A Turbo 400 From A Buddy. We Drained The Oil And It Was Super Clean. It Looks Like It Was Rebuilt Because The Paint Looked Good, The Seal Looked New, And The Fluid Was Clean. Queastion Is Should I Just Refill It And Run It? I Even Have A 2600 New Converter For It. If I Dont Need To Go Through It I Wont But I Need Some Input. Thanks:d
What did the buddy say about it? Is he a good enough buddy to tell you what you want to hear or the truth?

If you will be using it right away and you can afford to take a little risk, put it in and try it out. If you have time, I'd put a new front, rear seal and new trans pan gasket after inspecting the filter to see if it has crud or the pan has any shiny parts that shouldn't be there.


All times are GMT -5. The time now is 08:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net