Lateral-g Forums - OEM Track Width

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)

- - OEM Track Width (https://www.lateral-g.net/forums/showthread.php?t=32488)

240RR

06-23-2011 12:35 PM

OEM Track Width

OK....I am using rear suspension from a 350Z and need to figure out how Nissan or OEM measures track width. I always thought it was flange to flange (outside) but appears it may be a center of the tire measurement.
If I can not find out without a doubt I may have to hijack a 350z and get some measurements as this is critical to my chassis build.
OEM specs state rear track width on a 350z as 1539mm
Thanks!

70rs	06-23-2011 01:22 PM

As I understand TRACK WIDTH.....that should be outside tires edge to edge with OEM selected tires in place. I could be wrong, wouldn't be the first time. :D

240RR

06-23-2011 02:34 PM

Quote:

Originally Posted by 70rs (Post 355671)

As I understand TRACK WIDTH.....that should be outside tires edge to edge with OEM selected tires in place. I could be wrong, wouldn't be the first time. :D

Oh, I have seen that mentioned also. I might have to just find one to measure so I can make sure. Funny when I do a Google you get three different options. :(

All times are GMT -7. The time now is 11:32 PM.