ProCharger LSX Transplant Kit for Sale - ALL brackets, LS9 Cam, Injectors
 

Hey Guys,

To start off this is the same kit that was for sale by Billy Flantos on LS1Tech a little while ago that I bought...THERE IS ABSOLUTELY NOTHING WRONG WITH IT. Billy was 100% honest and the kit was complete as sold.

The reason I am considering selling this kit is because we had some really bad storms around last week and not one but TWO friggin' trees toppled over in my yard. This is not a new thing unfortunately and I have had to pull the trigger on getting these and the rest removed from the property...all told = $4800

That being said, I would like to put this up for sale again. The kit Billy had for sale is here:

http://www.ls1tech.com/forums/conver...9-camaros.html

I paid $2200 shipped from Billy and it was smoking deal. His kit included the D1SC, the drive pulley on the balancer, fluid, etc...

What I am doing is completing the kit - I am included the ProCharger Transplant alternator bracket, PS brackets, ATI Balancer, FIC EV6 80lb injectors AND an LS9 cam..all recently acquired and brand new. This will be a complete bolt on system for someone. The LS9 cam is a 3 bolt cam.

The Price is $3500 shipped and is a smokin' deal in my opinion since everything is BRAND NEW!!!!!!

I am looking for trades plus cash on a LS3/L92 style intakes, Stock LS3 fuel injectors, preferably FAST set-ups but an LS3 intake with injectors would be just fine. Need Drive by cable throttle body FWIW.

There are NO accessories included...only the brackets. Vette water pump, alternator and PS will take care of you.

I am open to offers but don't expect me to entertain $2500 offers.

I am not going to break this up at this time unless I have people for everything.

I will take PayPal as a gift. Again, price is $3500 shipped.

Email me at W31LSX<at>gmail<dot>com

Thanks!
Dave

Wow Dave, that is a smoking deal! Good luck with the sale.

Thanks man, basically you are getting the injectors and cam for free...but I need to move this stuff and I think my price is pretty reasonable.

Here's some pics as it looks on the front of my 442 engine (no PS installed in these shots but bracket is there):

http://i908.photobucket.com/albums/a...e/IMG_9383.jpg

http://i908.photobucket.com/albums/a...e/IMG_9382.jpg

http://i908.photobucket.com/albums/a...e/IMG_9381.jpg

http://i908.photobucket.com/albums/a...e/IMG_9380.jpg

http://i908.photobucket.com/albums/a...e/IMG_9379.jpg

http://i908.photobucket.com/albums/a...e/IMG_9378.jpg

The injectors are in the USPS box on top of the intake.

Thanks!
Dave

I would really like the injectors if they become available
[email protected]

Pro charger
 

Do you know if you can use a sanden compressor for the a/c or can you can you run a/c at all. Also do you know if the three bolt LS9 cam will work on a LS6. Thanks Dion

If you have an LS6 cam in there already you would be fine with that cam as the LS6 is actually a pretty good boost cam and the is similar to the LS9, but to answer your question the LS9 cam should work in the LS6. I believe your springs should be ok but I would still check that out.

You can run AC with this set-up and I believe there is a bracket for it as well. It may actually be the Fbody set-up as I think the AC compressor goes in the lower left when viewed from the front. Check out Brutespeed.com, Bob has a TON of the parts on his site. That is where I got all the add-on brackets from.

Thanks,
Dave

ProCharger
 

Does this include the intercooler or does it not need one?

TT

I am throwing in an intercooler I got with the kit (it is a ProCharger) but I do not think it is very good and it is has the inlet and outlet on the same side.

Whether or not you need an intercooler is relative - lower compression = more boost with no intercooler. If you are closer to stock compression I would not recommend more than 4lbs or so without meth or an intercooler.

Short answer - get an intercooler. Just Intercoolers on ebay actually has some pretty decent ones for not a lot of scratch.

Thanks!
Dave

Sold, pending payment!