Lateral-g Forums - Help, Gmod Issues Possibly

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)

- - Help, Gmod Issues Possibly (https://www.lateral-g.net/forums/showthread.php?t=33317)

Help, Gmod Issues Possibly

So, yesterday I performed the guldstrand mod on the LH side of my subframe only to notice the second hole I drilled toward the rear is on somewhat of a curved part of the control arm mount. I was wondering is this normal because wouldn't the integrity of the bolt head be compromised of strength being on an un even surface? I'll get some pics up shortly. I USED THE GULDSTRAND TEMPLATES I BOUGHT, SO I KNOW THE TEMPLATES ARE CORRECT.

http://i13.photobucket.com/albums/a2...k/IMAG0587.jpg

http://i13.photobucket.com/albums/a2...k/IMAG0586.jpg

I know the shims should help with the hump in the middle
http://i13.photobucket.com/albums/a2...k/IMAG0585.jpg

my gmod looks the same. my alignment shims don't seat all the way down but its solid.

Your ok.

If you wanna make life easier, tack weld the bolt heads. This way you just need 1 wrench to loosen or remove the UCA.

one thing I thought of is tacking the first few shims in that area so they stasy put...since they dont seat all the way down they have a tendency to move around until tight...but it really doesnt matter.