WTB TPI intake stock/OE
 

Looking for a stock /OEM TPI intake for a 1995 305 powered IROC Z.

I have a TPI intake, but its for an l98, 95 should be lt1. I think last year of iroc-z was 92...

anyway if you need the intake, I'll knock the dust off and make sure everything is still good.

Sorry for the late response, I will confirm the motor and let you know. Not my car. Thank you for replying.

Edit: it is a 305. IROC or Z28? Who knows. Should be same if yours is a non lt1 right?

You are wanting just the intake? No runners, plenum, tb, etc? I've got a complete unit less sending unit sensors - not sure of year but its L98, not LT1. -Bob

I apologize, I do need the entire unit. Runners and all. I dont need the sensors, sending units.....any electronics or related. Just a complete intake manifold set up.

Hold the boat guys.....the car (which I have NOT seen) is a 1985....305 tpi.
I need the full intake manifold set for this.

See what happens when you don't go check it out yourself?

All the pieces are sitting on my shop floor. You will need to source bolts and injectors. Everything else is there. I will PM so I can get address to send it to.