Lateral-g Forums - This doesnt do alot of guys on here any good, but take a look at my suspension kits.

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - This doesnt do alot of guys on here any good, but take a look at my suspension kits. (https://www.lateral-g.net/forums/showthread.php?t=34492)

This doesnt do alot of guys on here any good, but take a look at my suspension kits.

I know it doesnt do anyone on here any good, but I wanted to show you my new company's (Swedish Ops) crossmember suspension kits for the Volvo P1800's and Amazon's. Direct Bolt in, and works with the original motor, along with other engine options like the General Motors Ls Series engines.

We are not done with the cropping, and logo placements, but here are a few updated pictures of the Swedish Ops Crossmember/Suspension Kits.. I had a photographer come in and takes some pics a week or so ago, and here are some of preliminary pics.. As you can see there are alot of color and texture combinations, braking options, rack and pinion options, along with coil over options.. These are how the kits are shipped out, fully assembled and coated..

14 Wilwood Rotor with 6 Piston Calipers

http://i290.photobucket.com/albums/l...n/IMG_1191.jpg

http://i290.photobucket.com/albums/l...n/IMG_1175.jpg

http://i290.photobucket.com/albums/l...n/IMG_1181.jpg

http://i290.photobucket.com/albums/l...n/IMG_1215.jpg

http://i290.photobucket.com/albums/l...n/IMG_1230.jpg

http://i290.photobucket.com/albums/l...n/IMG_1220.jpg

Wilood 12.19 inch Rotors and 4 Piston Calipers with Power Rack and Pinion

http://i290.photobucket.com/albums/l...n/IMG_1273.jpg

http://i290.photobucket.com/albums/l...n/IMG_1241.jpg

http://i290.photobucket.com/albums/l...n/IMG_1245.jpg

http://i290.photobucket.com/albums/l...n/IMG_1250.jpg

http://i290.photobucket.com/albums/l...n/IMG_1284.jpg

Robert, as you've stated, I don't have a Volvo, but that is some fine craftsmenship you've engineered there. Much success in the future and good luck on your company. :cheers:

Very nice looking pcs.you should talk to Darren at Ride Tech about using their Monotube coil overs.Much better ride qualtiy than QA1's or Strange.You will be very happy with Ride Tech's coilover's.Keep up the great work.:thumbsup: :thumbsup: Scott M.

Nice work Robert............from an old ex-Volvo guy. I went from a 66 GTO to this in the late 70's: (flame suit on)
http://sieg.smugmug.com/Other/Cycles...01_xvZXE-M.jpg

Wow, looks great! :thumbsup:

:cheers:

Quote:

Originally Posted by ratman67 (Post 380813)

can you post some more pics? from different angles? how about a few shoots taken from helicopter from overhead....

Ha Ha, I think....

Looks cool! Will it work with the Volvo 142?