Center Dash vent ideas please....
 

I am looking for a center dash vent for my camaro but need something that mounts on a flat surface. Do you guys know of any factory cars that have cool looking vents that I can mount on a perfectly flat area? Or maybe some cool billet hot rod ones?

Thanks

ive always really liked the ones from vintage air that look like throttle butterfly's
they were used on the DSE dale e 2nd gen
http://www.detroitspeed.com/projects...jr-72-pg1.html

Take a look at these
 

take a look at this website.
http://www.euramtec.com/sections/sec_e01.html
modern looking, OEM style, and they don't look cheap, even though they are relatively inexpensive.

There are always billet vents, but those tend to be pretty expensive, and they look it too. And you seem to have lots of options if you like oval or round, but not many other options beyond those two. Believe it or not I've found a bunch of ideas on ebay, both new and used. Billet examples are...

http://www.billetspecialties.com/ite...id=113&pid=270
http://www.phippsproducts.com/AC%20vents.htm
http://www.zirgo.com/catalog/Air-Con...-Vents/ZFBWAC2

As for OEM vents that look marginally cool, I've seen some on later model Ford F150/F250 trucks, however some tend to be over sized for a car. They are round vents, with a chromed/silver paint plastic trim bezel.

I too had looked into the ones on late model Ford trucks but will probably end up going aftermarket. Thanks for the additional ideas Deton8r!

You guys are awesome thanks!:thumbsup:

Now just need to decide if I want the Euramtec or one of the billet ones.

take a look at the Vintage Air Catalog
 

Try these links to the Vintage Air Catalog. See the 2011 catalog pages 53 and 54 in particular. I Couldn't find these a few days ago.

http://www.vintageair.com/catalog11/pg52wc.pdf
http://www.vintageair.com/catalog11/pg53.pdf
http://www.vintageair.com/catalog11/pg54wc.pdf

John, I hope you have been able to get your build back on track?