What heads would you go with?
 

Just having a bit of fun -- if coin were not an issue, what would you run?

Mozez Canted Valve:
http://www.mastmotorsports.com/2010/...%20Bare&id=353

Mast Splayed Valve:
http://www.mastmotorsports.com/2010/...%20Bare&id=352

All Pro RE-13:

http://www.allproheads.com/Images%2011/AllProCat10W.pdf

Edelbrock Pro-Port:

http://www.edelbrock.com/automotive_..._port_ls.shtml

Or something else...

Thoughts?

:cheers:

What are we building?

I'm targeting 1000 - 1200hp at the rear wheels on pump gas. Slightly more:unibrow: with better fuel.

The plans are for events such as Texas mile, Silver State Classic Challenge, etc. Slightly longer than 1320 feet.

Thoughts?

forced induced I take it?

Id go with the pro port's and send them out, But mast does make a beautiful product.

I believe LMR's camaro is using GM's LSX head BUT I could be wrong.

https://www.youtube.com/watch?v=ki1QrCGfntk

Yep, twin turbos.

:cheers: