67 camaro
 

Many of you guys have seen my red 69, I just dont have the room for two cars. The 67 only has 1166 miles since completed in late 08, its very fresh. The car was featured on the cover of Super chevy in feb 08, shortly after that I swapped out all the new Baer track brakes for the wilwoods and the budnik steering wheel got swapped for the more comfortable MOMO. Then started building the 69, the 67 was a full frame off resto, everything is new down to the hardware level. The car drives very nice, while the full sequential fuel injection makes the throttle responce and driveabilty very nice. This thing would be awesome on a long haul power tour. It needs to be driven, Im in Oakland NJ, $42k

Thanks Rich


Build sheet for 67 camaro
Body
complete new old stock front sheetmetal
NOS front fenders
NOS cowl hood
NOS upper valence
NOS lower Valence
NOS drivers door shell
repro floor
Detroit Speed & Engineering mini tub rear wheel houses
paint Debeers - 92 chevy truck 34--- b7-45878 emerald turquoise
all new rear light bezels/ bumper/
Detroit Speed & Engineering front high intensity headlight beams

suspension
Detroit Speed & Engineering rear 3" drop leaf springs
Detroit Speed & Engineering rear upper shock crossmember
Detroit Speed & Engineering rear Koni shocks
Detroit Speed & Engineering offset shackles
Detroit Speed & Engineering front coil over conversion(beadblasted front subframe)
Detroit Speed & Engineering upper and lower control arms
Detroit Speed & Engineering front Koni coil over shocks w/ 600lb springs
Detroit Speed & Engineering steering gear box and all steering linkage
Detroit Speed & Engineering- hotchkis front sway bar
Detroit Speed & Engineering solid body mounts
Detroit Speed & Engineering frame connectors


Wheels
Budnik fontana 17x11 rear BFG KDW 315s
Budnik fontana 17x8.5 front BFG KDW 245s

Gas tank stainless steel, Detroit Speed & Engineering built by Rock valley
Aeromotive A-1000fuel pump
Aeromotive regulator, billet filters 100 micron and 10 micron
All Brown and Miller PTFE crimped convoluted fuel lines front to back

new Moser 12 bolt Rear end housing, 33 spline axles, Big ford ends, 3.73 eaton posi unit, T/A aluminum cover.

new Dennys drive shaft 1350 u joints

New TKO 5 speed transmission/ with a Mcleod DF clutch/ Mcleod safety sfi bell housing

New Bill Mitchell 427 cu in. small block
Wilson Manifold prepared world single plane intake for full sequential fuel injection
FAST XFI engine managment computer
FAST distributor and throttlebody
Hooker supercomps Jet Hot coated
Stainless Works 3 inch 304SS exhaust system
Ron Davis dual pass dual fan with integrated overflow tank
optima red top
AAW classic update harness front to back with FAST fuel injection engine harnesses

Brakes
Wilwood superlites 6 pots(black) front 13"slotted/crossdrilled rotors
Wilwood superlites 4 pots(black) rear 13" slotted.crossdrilled rotors
Hydratech hydroboost hydraulic assist unit
all new brake lines

Interior
corbeau black leather TRS front seats
refinished stock rear seat
complete new interior including new stock headliner/ package tray/ carpet/door panels/hardware, cranks, handles
Wing window pot metal up rights sent out for new chrome and completely rebuilt
metro seals
Momo Jet steering wheel
Tilt column
covans dash guage bezel with autometer ultralite guages
new dash cover
all new green tinted glass from auto city glass
sound deadening FatMat

This was a complete off the frame restoration/modification built car every nut and bolt is new. Hit the major parts, all light bezels are new as well.

http://i168.photobucket.com/albums/u...SIIMG_2312.jpg

http://i168.photobucket.com/albums/u...p/DSC_0076.jpg

http://i168.photobucket.com/albums/u...Picture081.jpg

http://i168.photobucket.com/albums/u...p/DSC_0115.jpg

GLWS Rich. Someone will get a great car!

Part of me is wanting to cuss you out for selling a car that I REALLY like. Mostly I am thankful it doesn't have AC or I'd be in trouble....again.

Hate to see you let it go and if it does, I hope one of our members here will snatch it up.

Best of luck man.

:cheers:

Thanks Ron, Thanks Curtis

Its time, I haven't listed it with ebay yet, hoping it sells quick. My wife and I had it out for a nice cruise this past weekend. It drives so nice, cruising on the Jersey interstate at 2200 rpm about 70mph just soakin up some California weather that we dont get to often.

Rich

Is it me or is this the Steal of the Month/Year. If I did not already have 2 69 camaros I would be all over this. GLWS! Should be quick:thumbsup:

That is one gorgeous Camaro! GLWS

I listed the car on ebay, Here it is with a few different pics:

http://cgi.ebay.com/ebaymotors/1967-...item4d02911c2e

come see it, make an offer, Im negotiable

Thanks Rich

Very nice looking ride Rich, somebody is going to get a great car for sure:thumbsup:

Thanks kurt and all you guys for the kind words. Starting to see some interest will let you know how it goes.

Thanks again for everyones support- Rich

OK. So I told myself no more cars. I'm 6 cars heavy right now but this is some thing I would buy in a heart beat. I'm trying to hold back but I may give you a PM soon or you can call me this afternoon around 3pm my time.

Thanks, John 510-867-1797