Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Interior and Electrical (https://www.lateral-g.net/forums/forumdisplay.php?f=40)
-   -   69 camaro wiper motors (https://www.lateral-g.net/forums/showthread.php?t=37590)

jblaine86 07-14-2012 06:57 PM

69 camaro wiper motors
 
I have a 69 camaro that I want to relocate the wiper motor. Has anyone put the wiper motor on the inside of the car under the dash? If so, does anyone have pictures?
Thanks,
Jon

Musclerodz 07-14-2012 07:15 PM

There is a company that just came out with a kit that relocates the wiper motor inside the cowl. I think it was Raingear that did.

Ron in SoCal 07-14-2012 08:00 PM

Quote:

Originally Posted by Musclerodz (Post 424816)
There is a company that just came out with a kit that relocates the wiper motor inside the cowl. I think it was Raingear that did.

That's it Mike. There's an ad in this month's Super Chevy. Their website:

www.pacificwesterndesign.com

jblaine86 07-15-2012 08:07 PM

2 Attachment(s)
I like that system but here is what I am working with. I bought the car like this and want to put windsheild wipers on it. Any suggestions?

Musclerodz 07-15-2012 08:35 PM

Does it still have the vent cowl in it un cut? If so you might be better off grafting in a new upper firewall top cowl section to get all your mounting points, access holes, and wiper motor mount located. Otherwise you have a lot of work to install a universal kit.

jblaine86 07-15-2012 08:45 PM

It still has the vent cowl and it does seem to sit on there. The original cowl is gone and it is a straight piece of metal.

Musclerodz 07-16-2012 07:24 AM

Quote:

Originally Posted by jblaine86 (Post 424980)
It still has the vent cowl and it does seem to sit on there. The original cowl is gone and it is a straight piece of metal.

by vent cowl i meant the car not the cover panel sorry. Your best bet at this point is probaby going to be a universal kit of some kind unless you put that area back stock I am afraid to say. The Raingear unit may still work, but would require you to locate all the factory mounting points and bolt everything back where it belongs.


All times are GMT -7. The time now is 08:43 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net