Stainless brake line
 

Where can I find a roll of 3/16 and 1/4 stainless brake line and fittings? what is everyone using for brake lines? Thanks guys:cheers:

Stainless line usually comes in straight lengths. It's tough to bend, if it was in a roll it'd be near impossible to get straight again.

I've always bought mine locally at the places I get my AN fittings. Inline Tubes sells it also, but not sure what shipping does; it would definitely limit the length.

so what should I use? use standard line then paint them somehow? I never worked with stainless before.

someone said copper nickel I think is easier to work with,

Definitely easier to work with and its supposed to be pretty corrosion proof.

I used copper-nickel and lightly buffed it with 000 steel wool. 25' Coil lengths and very easy to work with.

http://sieg.smugmug.com/Cars/69-Cama...IMG3690-XL.jpg

You can also buy stainless tubing from Summit in coil lengths. You'll probably want/need a tubing straightener with the stainless.

You can buy stainless tube and fittings from Eastwood also...

check these guys out and read the tech clip at the bottom of the page. specifically the one about flaring stainless tubing.

http://www.inlinetube.com/