Gauging Interest: Rick's Vaporworx Tank, A-body Suspension, CPP Big Brake Kit, etc...
 

Hey Guys,

Just recently I "purchased" (leased with the intent to buy) a 2013 CTS-V and now that I have that car I pretty much been wanting to focus on an all out drag car project - my '84 Cutlass.

That being said I have a ton of parts that have absolutely minimal wear on them and really no use at this point so I am seeing if there is any interest in picking up any of these things. Most of it is on or in the car and the car is running currently but I am taking the engine and possibly the PSI Conversion harness. Not sure if I want to use the Holley Dominator EFI or not.

Anyhow, here are the things I would have up for sale. Let me know if you are interested in any of it:

- Rick's Vaporworx tank with a 5th Gen Camaro fuel pump (regulator replace with 4th gen for dead head single line set-up); has all the provisions for return-style as well. Also have a CTS-V pump available for those who want to go really big power but will need the Cassanova voltage controller. Comes with pigtail as well.

Looking to get $1200 for it as it was over $1600 with both pumps. Like brand new...works great! Will be difficult to ship but will travel to meet someone for the exchange.

- Complete BMR Fabrication Pro-Touring Suspension package - tubular arms, coils, A-body short spindles, Adjustable upper rears, solid lower rears, big sway bars all powder coated red. Will add part numbers and pics soon. Paid over $3000 for it...sell for $2200.

- CPP Big Brake kit - manual discs, Red Calibers, 13" front, 12" rear, corvette master cylinder. Great kit like new only stopped car in and out of garage. I believe this was ~$1700. Sell for $1000.

- Built 4L60e transmission, 2600 stall converter. I can give the information of who built it. DiabloFormula racing. Brand spanking new and in fantastic shape...only backed the car in and out of garage. Traded a $1800 turbo for it...sell for $1000.

- Boss 338 Rims - black centers, polished spokes with Kumho Ecsta ASXs - 255/45-18 fronts and 285/40-18 rears. Practically brand new spent close to $2000 for them...$1200 for all 4.

There will be other miscellaneous stuff for sale as I move things over to the '84.

I am flexible on pricing to a small degree and will deliver if close enough.

W31lsx<at>gmail<dot>com is the email.

I will post pics tonight as well.

Thanks,
Dave

what year chevelle was this for??
looking at the bmr stuff and the tank

pm sent

This was in a '69 Cutlass (or any Abody).

It will work for '68 thru '72 A bodies.

Thanks,
Dave

pics??

Can you post a pic of the wheels also what is the bolt pattern and backspace

thanks

and where are you located?

Very sorry I have been so quiet....getting my azz handed to me at work and by the time I get home I am exhausted.

I will post a ton of pics today and respond to everyone's emails and PMs. So sorry again, I truly didn't expect this much interest!

Poster above. I am in NJ near Philadelphia.

Thanks,
Dave

bump.