Forgeline wheels for sale .. again
 

New Forgelines are on the way, so it's time to move along the current ones.

There are six wheels for sale.. go figure.

2 - 18x12 with a 5.75" backspace

2 - 18x9.5 .. can't remember the backspace, but it's the typical one for C5/6 Vette offsets (subs that use a C5/6 Vette upright) I will find out tomorrow what it is.

2 - 19x12 with a 5.75" backspace

All the wheels are Forgeline DS3 split 5 spoke wheels. These are stepped wheels with gunmetal coated centers (and inner hoops to hide brake dust).. All six wheels also have titanium fasteners.

http://www.forgeline.com/products/pe...-18-19-20.html

Local buyers who want the 18x9.5 and/or 19x12 wheels get them with decent Nitto NT05 tires

The 18x12 wheels don't have tires

Wheels are used, but in great shape.. New they are over $1000 a wheel, the Ti fasteners add $100 per a wheel.

$2200 for four or $1100 for two so you can get all four of the 18s or 18 front and 19 rear. Where else are you going to get Forgelines for $550 a wheel? :)


They look like this:

http://sphotos-a.xx.fbcdn.net/hphoto...43421122_o.jpg

Oh, I can ship wheels.. but not with the tires. Shipping costs will be whatever UPS charges me. Typically about $100 to $150 for four wheels. I can deliver in most of SoCal.

Email me at [email protected]

The combo that's pictured on the car: 18's all around or 18 front and 19 rear?

This is an Awesome deal for someone.:thumbsup:

I would like the 18/19 combo shipped to 70605. Why can't the tires be shipped mounted? I can send you a pick of how I've shipped several sets of my viper wheels with tires mounted.

Well, I can't box them with tires.. I guess I could put cardboard on the front and shrink wrap them.. but to be honest I don't trust UPS that much and I would hate for the wheels to get jacked up in transit since UPS is known to deny damage claims. And the tires are worn, decent for rollers and them have one more track day left in them.

I didn't think they were worth the weight to ship them.. but if the buyer insists I would.. reluctantly. :)

If buyers want's the tires and is willing to pay the extra freight then ok.. :)

18s all around in that picture -- 19s look good, but I changing tires and need a new wheel combo.

Not trying to make any money.. just getting more even on the new wheels I paid for :)

I just put a front and rear together with the outers facing each other and cardboard in between and on the outside. Shrink wrap the hell out of it. I shipped my viper wheels like this a couple months ago for ~$250. Will the fronts work with a stock subframe? If so, can you email pics to [email protected] and we can make arrangements. Thanks

I guess that would work..

The fronts are not for a stock sub.. the offsets would be all FUBAR.. should be close for a DSE, Morrison or other late Vette sub.

steve, i wont have my dse tubs in for a few days and would like to measure how much room i have on my 68. i was told without cutting the frame rails back i wouldnt be able to get a 12 in there without it rubbing with the stance i want. i would like it to tuck the rears and the 19 rears would give me the look i think. i have a jakes rod shop front that uses c5/6 components so im sure the fronts will work. if you have them in a few days i will take them..