![]() |
Relay center thread
The other day I was looking through new posts and ran across someones thread with their new electrical purchases. I was interested in the relay center in that thread but cannot find it to save my life. The thread included tools and a relay center and if I remeber correctly some wiring. Anyone know which thread I'm talking about?
|
|
Unfortunately no. It was not a GM panel. I was looking for the thread because I cannot remember the name of the company. It was a compact unit that had 5 relays and fuses if I remember correctly.
|
I recall that too, but couldn't find it. Rodger at Ironworks may have used something like that in his Camaro track car. You may check with him. Good luck!
|
Check the beach cruizer thread.these a few pages of wiring.
https://lateral-g.net/forums/show...t=16169&page=8 Good luck John |
Deadenbear Multiple Relay Center Model MRC-1. Normally used on nitrous setups. Summit Racing sells this panel. Ring Brothers used it on the Dragon build. Hope this helps.
Neil B |
I just bought a sealed unit from Bussmann, it is a compact panel that has provisions for 5 Micro relays, and 10 micro blade fuses. It is going to require all of the wiring and crimping by myself, but I got the whole fuse block, 5 micro relays, 250 ft. black 18 gauge wire, 250 ft. of red 18 gauge wire, and more plugs, seals and female connectors that I will know what to do with for just over 100 bucks. I bought them from waytek. I can't wait to get started on wiring my LS1!!
|
Don't know if this is the one but I used this one from Hella
http://www.amazon.com/HELLA-H8498800.../dp/B000VUEDXY |
I already knew about the Dedenbear. I saw the unit from cooper and wanted to look into it.It's sold by Waytek. Here is a link in case anyone else is looking.
http://www.waytekwire.com/item/46343...RO-RELAY-RTMR/ Thanks ryeguy |
All times are GMT -7. The time now is 04:39 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net