Need pics of 1st gen Camaro with flat face wheels
 

I have a 67 Camaro and was thinking about putting a wheel with no or minimal dish/lip on it. The car is not minitubbed and has standard width axles. Thought I would try something a little different and put on a TSW Donington, Nurburging, or Mugello - or something similiar. I was hoping someone has already went this route and/or had some pics that I can referrence before spending the money. Pics of a 1st gen Camaro would be awesome, but any older car would help too.
Any pics or advice would be great
Thanks

Here's a killer 69 with CCW's that have a minimal dish to them.

http://www.camaroperformers.com/even.../photo_20.html

Blazen... tell me what your thinking? I am thinking a similiar setup and one thing you will see is lots of "vette" setups with huge spacers... Not a fan...
The car in the above link is the JRS R&D car.. that is more like what I am thinking... take a look at the "5K MUSTANG BUILD" that is more like what I am thinking,,

I am looking at these..
http://www.ccwheel.com/wheelprofiles-display.php?id=C15

Hopefully this thread grows I am keen to see more cars setup this way//

http://www.jakesrodshop.com/Projects..._TT_69.html#98
http://www.jakesrodshop.com/Projects..._TT_69.html#87
http://www.jakesrodshop.com/Projects...TT_69.html#117

I keep going back to this type of wheel. I'm afraid it's one of those love it or hate it wheels. I can get this wheel with a close offset with very little spacer needed.

If I use a wheel with a dish - my max dish would be about 3.25 inches, which isn't very deep. So I though I would just change the look up and do something different.

Good example. :thumbsup:

http://i87.photobucket.com/albums/k1...ma-ultim-1.jpg

bad pic but what about some 3 series wheels that im using as rollers?
http://i30.photobucket.com/albums/c3...ps591664aa.jpg

Yea thats a very similiar wheel to what I was thinking but smaller. What are those 16 or 17s? Do you have a straight side veiw of it? I'm going with 19x8 front and 19x9.5 back

18x8 and 18x8.5 ill look for a better pic

I'm looking at TSW's too....posted in the wheels section yesterday about them.

Here is one with them on a 68 i just found.

http://www.pro-touring.com/showthrea...lver-and-Black

Hope it helps, you can always contact him on fitment.

Price is awesome and they sure have nice models!!!!!!!

Lead.

Here's another one i found with 19 and 20's PETROL from TSW.

http://www.motortopia.com/musclecarp...67-camaro-896/

19's all around does it best. 19 x 11 rear w/ 315's .

Lead