Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)
-   -   69 camaro deluxe door panel question (https://www.lateral-g.net/forums/showthread.php?t=39645)

PSV 12-28-2012 01:32 PM

69 camaro deluxe door panel question
 
I am looking for measurements of the door pull on the deluxe door panel please. I need the length and distance it sticks out ( height) of the door pull. The roll bar in my car interferes with the arm rest base on a standard door panel so I am thinking about using the deluxe door pull rather than the arm rest if the dimensions are close. Thanks!

g356gear 12-28-2012 02:22 PM

Quote:

Originally Posted by PSV (Post 453952)
I am looking for measurements of the door pull on the deluxe door panel please. I need the length and distance it sticks out ( height) of the door pull. The roll bar in my car interferes with the arm rest base on a standard door panel so I am thinking about using the deluxe door pull rather than the arm rest if the dimensions are close. Thanks!

I would think that the door pull would be in the exact same location for both interiors since the cars were going down the assembly line and were getting standard or deluxe.

PSV 12-28-2012 02:42 PM

The standard door panel doesn't use a door pull as it is part of the arm rest. The standard arm rest base sticks out 3 inches from the panel and of course my down bar goes thru that area. Im hoping the deluxe pull is about 2 inches high and the same width.

PSV 12-28-2012 02:51 PM

This is the part I need mesurements for please.

http://www.rickscamaros.com/camaro-d...1968-1969.html

JKnight 12-28-2012 11:03 PM

It's 10.5" long (including chrome trim base) and sticks out 1 5/8" from the deluxe door panel at its' highest point.

Edit: I'd call it 10.25" without the chrome trim base as your link pictured.

PSV 12-29-2012 08:35 AM

Thank you that's exactly the info I needed. :thumbsup:

camcojb 12-29-2012 10:50 AM

the deluxe door panels use a different window crank assembly; it's longer because the door panel is wider there. Some guys use the standard crank assemblies but it sucks the door panel in.


All times are GMT -5. The time now is 09:13 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net