Wiring harness help
 

I need to order a full harness for my 67 camaro, I'm keen on AAW kit but unsure if I need the classic update or the hwy22? the car is a rolling shell so has no old wiring or connectors for lights/dash/column etc to reuse. I intend to also have pwr windows, pwr door locks, stereo with amps, dakota dash, vintage air etc. Its currently got a carby small block, which for registration purposes (Australia) I'll get car finished with, then change to ls3. How complete is each kit i.e do they both come with all neccessary connections to front/rear lights, dash, interior lights etc?? or do I have to separatley buy all those? I live in Australia so want to make sure I get the right harness for the job. Any help will be much appreciated.

Jonny

Aaw
 

I put the Classic Update in my 69. The step by step instructions made it easier than building a model.

Is there spare circuits for pwr windows and door locks etc?

Yes there are.

cool thanks, I'll order that one

In your case, I would definatley order the Classic update kit. Has all the extra circuitry you could want, very nice to install, comes with all the connectors you could need.

BUT if you are looking for a custom install, with the fuse block not in stock location or are doing a different pass through in the firewall, then the highway kit is a nice option. You can find all the light sockets you need through a couple places, I can help if you decide to go the custom route. But if your not doing something that justifies custom harness and/or fuse block relocation, then the Classic Update is for you.