Twin turbo manifolds
 

Who makes a good set of headers/ manifolds for a TT setup on a ls3 in a 1st gen camaro. I found a complete TT kit for a SBC for 800 bucks with brand new turbonetics 56mm turbos, gauges, manifolding, everything new but I don't want to buy yet if headers are going to be 2gs and car isn't complete yet. I would like ones that mount them at the front of the engine. I have a street and performance front accessory drive kit.

XS Power has a set of stainless with T3/T4 flange for around $300 I think.

Stainless works, virginia speed, OBX

I ended up buying my headers from this guy.

http://ls1tech.com/forums/parts-clas...o-headers.html

I was working just to the north of him in Buffalo WY, so I drove down to pick them up. Pretty good guy, said he has BBC and SBC headers to.

For LSx swaps you can also run truck manifolds flipped forward (reverse the side they came on). If you need more clearance cut off the 3 bolt flanges and weld on Vbands. 2.25" crossover will support over 1500hp. 2.5" crossover will flow 2000hp with truck manifolds. The Ohio Boys who ran a built LS2 single turbo went 200mph in the 1/4 mile running truck manifolds in a 4th gen Fbody full weight.

Truck Mani's

TT headers
 

Thanks for the help guys. The car should be going to paint in a couple weeks and once completed ill prob put a couple thousand miles on it then jump into the TT setup. Hopefully.