Body Shop with Carbon Fiber Experience Seattle?
 

Looking for a shop or person who has some experience finishing fresh carbon fiber parts. The parts need basic sanding then clearing.

location?

Well anyplace in Seattle really willing to drive a little bit for a good result. I would say anyone 25-35 miles from Seattle metro area.

We do it weekly in the aviation world, but in Tennessee... if the parts could be shipped...

We do some carbon work. Check out Art Morrison's 60 vett, that is some of our work.

PS, we are in Puyallup. www.carbonguy.com

Been 3 Months and no replys from The Carbon guy, but im still looking for a shop in the area that does composits. Time is getting near for my project to be finish and this is holding me back. Any help will be appreciated!

Any body shop can handle that. I'm assuming you mean they are freshly out of the mold after being infused with resin? its as simple as sanding it with 600-800 grit paper and clearing on top of it.

Well now that its got some damage and will need some repair i think i need to find someone that can lay another layer on it.

if the fiber weave is damaged then yes it will need to be re-skinned. but if not you may not need to.