GMR C5/6 (Front) Hubs

http://thegmr.com/wp-content/uploads...-bolts-one.jpg

Are you frustrated of replacing your tired and outdated stock corvette unit bearing assembly on your pro-touring car? Are you looking for something that is both over the top in style and strength?

https://www.youtube.com/watch?v=B-6wqge82Y8

(click here or the picture above to see a quick video of GMR hubs on this 69 Camaro)

Well the GMR has your answer! Don’t let boring old stock unit bearing assemblies get you down anymore, Fight Back!

http://thegmr.com/wp-content/uploads.../DSC029511.jpg

The GMR C5/6 hub assembly is a direct bolt in component that will increase the strength of your front end while providing un matched style and attitude. This is a pro-touring hub designed for the pro-touring market, nothing else. With the ability to run multiple bolt patterns and small center wheels, this hub will open up your options for wheels like never before. You will no longer be confined by the limits of the 4.75 inch bolt pattern and large wheel center.

http://thegmr.com/wp-content/uploads...ition-one-.jpg

All GMR Front C5/6 Hub assemblies come assembled and with the new GMR Locking Wheel Bearing Nut assembly. This new locking nut is stronger then the traditional WH-N-05 series nuts that are common on most hubs designed in the same manor as the GMR front hub assembly. (click here for more information)

http://thegmr.com/wp-content/uploads...L-1024x294.jpg

Benefits:

Lighter than stock C5 hub by 1.7 pounds
Opens up wheel options compared to stock C5/6 units
Stronger than stock unit bearing hubs assemblies
100% Serviceable unlike stock hub assemblies
Corrosion resistant
Not Mass Manufactured
100% American Made
Features:

Aerospace Grade Material Construction
Non Corosive fasteners
Laser etched GMR part number on hub body
Laser etched GMR Serial Number on hub body
Dual bolt patterns 5×4.5 and 5×4.75
GMR 17-4 Stainless Fine thread 1/2″ wheel studs
Large Timken Tapered Roller Bearings
Pair Includes all mounting hardware and internal components.

Originally Posted by 214Chevelle (Post 475024) Does this hub change the track width any? I mean compared with the stock, GM hub is it taller if lying flat on a table next to a GM hub?

Originally Posted by Vince@MSperfab (Post 489752) anything new guys? been a little quiet lately. have a few customers ready to drop the hammer.