Chemical-Stripping over Media-Blasting?
 

Does anyone know if a reputable company that can chemical strip and e-coat an entire car body? Specifically a 69 camaro. I am told that Carponents is no longer doing entire body stripping.

Any suggestions?

Contact:

International Paint Stripping
15300 Oakwood Drive
Romulus, MI 48174
734-942-0500

They can strip and e-coat body shells within the measurements of 13.6 feet in length and 48 inches in height. Cost: $2500

The price has really gone up. :eek: When I had mine done it was $1800. That was about 3 years ago.

Hope it helps. :)

e coat
 

i realize this is the way to go, as it gets everywhere, but you can have a entire car media blast for 5-800 complete car
jake

That price also includes e-coating.

e-coat
 

That is great guys. Thanks for the reference. That will be about an 11-hour drive (from Memphis) for me but it will be well worth it. If anyone else has a reputable company to recommend...please do so. It will be a few months from now so I have a little time.

Trapin...your e-coat looks great. I checked it out on your site. I'm sold!! It looked fresh from the factory and soooooo clean. :thumbsup:

tndude,

Since you're in Memphis, you might also look into Metal Finishing Services here in Jackson, MS. 2.5 hours is a lot better than 11!! :yes:

Metal Finishing Services

I've been to their shop a couple of times and have seen their work. Everything looks very nice. The ecoating is actually done by another shop a few miles north of town, but MFS will handle everything for you. I and several others on Pro-Touring were all quoted $1800 for both. I'm here in Jackson if I can be of any help.

I hope this helps.

Chris

e-coat
 

That is better than an 11 hour drive!!! Looks as if they have a nice shop. Thanks!