Lateral-g Forums - RST/RXT equivalent clutch for LT1 T56

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)

- - RST/RXT equivalent clutch for LT1 T56 (https://www.lateral-g.net/forums/showthread.php?t=41486)

NorCal72

05-20-2013 10:40 PM

RST/RXT equivalent clutch for LT1 T56

Not sure if its just me but I cant really find any high end clutches for the LT1 T56 setup. I need a 11in clutch, hydraulic TO application, for a 600+ to the crank motor. I looked at Summit, Jegs, and the McLeod site and didn't find anything that caught my eye as equal to the RST. Am I missing it?

I should add its going to be a 93-97' LT1 clutch application with the conversion flywheel I have

Payton King

05-21-2013 09:46 AM

My buddy Ron just went through

this and ended up with a Centerforce twin disc.

May want to take a look at Spec and Monster as well.

NorCal72

05-21-2013 10:18 AM

Quote:

Originally Posted by Payton King (Post 481585)

this and ended up with a Centerforce twin disc.

May want to take a look at Spec and Monster as well.

Thanks, did he say how he liked it? What kind of power was he making?

Bad94

05-21-2013 06:25 PM

I have a spec 3 clutch with alum flywheel. Its a bitch in traffic.

I have been asking centerforce to make a DYAD clutch for this set up and they blow me off.

INTMD8

05-21-2013 08:14 PM

Quote:

Originally Posted by NorCal72 (Post 481521)

McLeod makes a standard twin disc for the LT1. Would handle your power no problem with organic discs and has perfect driveability.

NorCal72

05-22-2013 06:40 AM

Quote:

Originally Posted by INTMD8 (Post 481674)

McLeod makes a standard twin disc for the LT1. Would handle your power no problem with organic discs and has perfect driveability.

That's what I was looking for!:thankyou:

All times are GMT -7. The time now is 10:22 AM.