69 Camaro 12bolt cpp disc conversion
 

I just had 12 bolt posi gone through by Js Gear. Installed CPP disc brake conversion. I have multi-leaf staggered shocks. The driver side caliper is positioned at 2 o-clock and interferes with the shock mounting. Do not have same issue on passenger side as shock sits to front of axle.
Someone addressed this without in-board shock relocation?
Thanks

The drivers side calipar on a 69 Camaro goes in front of the the axle housing. make sure you have the bleeders facing up when installed correctly

http://i2.photobucket.com/albums/y3/...psdeaa7e5f.jpg

http://i2.photobucket.com/albums/y3/...psd9d9b0ae.jpg

From Kore3 kit info:

I can see how a shop could have made the mistake since the shock mounts are not attached to the rearend. Hopefully you get it worked out. :thumbsup:

Thank for quick replys
 

CPP originally gave me a wrong set and I took to my rearend builder. They called me later that day and said oops! I when back and they exched a caliper by they seemed confused - right no left no?

I have contacted them and they will swap out this week end.

Thanks again guys for the support! :thankyou:

Kore 3 stuff all the way! Great product and customer service is awesome. :thumbsup: