Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)
-   -   Fitment (https://www.lateral-g.net/forums/showthread.php?t=41994)

Ron Fox 06-24-2013 02:29 PM

Fitment
 
Here in the near future we will be putting everything back together for fitment. I plan on using the DSE sub but I do not have it at the moment. Is it a good idea to use the original sub or wait until I receive the DSE sub? Or does it matter?

Thanks.

Ron in SoCal 06-24-2013 02:35 PM

If you're trying to gap the car or looking at any other precise measurement/fit items, wait for the sub you'll end up using.

Rick D 06-25-2013 07:28 AM

Yup what he^^^^ said!! There could be small differences from one to another.

Ron Fox 06-25-2013 08:36 AM

Can we go ahead and fit and weld up the back half of the car (Floor, trunk, quarters, doors, mini tubes, rear suspension, etc. without any problems then fit the frount half of the car after receiving the DSE sub?

Thanks.

Sparks67 06-25-2013 11:01 AM

Quote:

Originally Posted by Ron Fox (Post 489184)
Can we go ahead and fit and weld up the back half of the car (Floor, trunk, quarters, doors, mini tubes, rear suspension, etc. without any problems then fit the frount half of the car after receiving the DSE sub?

Thanks.

That is what we did Ron. The DSE subframe just bolts on the front like the stock unit. The only slight adjustment is the front inner wheel house. Of course, my 67 Camaro is NOS parts. :sarcasm_smiley:

I remember Stacy Tucker telling me that they just switched subframes, when her and Kyle were testing out the parts.


Jeff

Ron Fox 06-26-2013 07:37 AM

Quote:

Originally Posted by Sparks67 (Post 489215)
That is what we did Ron. The DSE subframe just bolts on the front like the stock unit. The only slight adjustment is the front inner wheel house. Of course, my 67 Camaro is NOS parts. :sarcasm_smiley:

I remember Stacy Tucker telling me that they just switched subframes, when her and Kyle were testing out the parts.


Jeff

So no gap problems with the door/fender or hood?

Thanks.


All times are GMT -5. The time now is 06:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net