Mustang Coil-Over and R&P install.
 

I've managed to do some improvements on the Mustang this winter. A Total Control Products Coil-over kit and a Rack & Pinion has been installed. I also has subframe connectors ready for installment. :D Hopefully, this will help my cornering a bit.

Here are some pictures.
http://home.no.net/fvike/images/Dsc01164u.jpg
This is a new TCP Motor Mount.
http://home.no.net/fvike/images/Dsc01173u.jpg
Modification done to the steering column.
http://home.no.net/fvike/images/Dsc01174u.jpg
The TCP Rack & Pinion.
http://home.no.net/fvike/images/Dsc01185u.jpg
Here I am, during install.

Continiued....
 

http://home.no.net/fvike/images/Dsc01418u.jpg
Engine bay.
http://home.no.net/fvike/images/Dsc01426u.jpg
Passenger side LCA and Strut-rod.
http://home.no.net/fvike/images/Dsc01427u.jpg
During install.
http://home.no.net/fvike/images/Dsc01432u.jpg
Just missing spindle and Tie-rod.

And more...
 

http://home.no.net/fvike/images/Dsc01443u.jpg
New KRC PS pump and resorvair.
http://home.no.net/fvike/images/Dsc01444u.jpg
Rack and Motor Mount.

Looks really nice. You Norwegians have some really cool classic cars.

Nice detailed pics! Thanks for the update. :thumbsup:

looks good
 

Tell me how that thing drives now. I have a friend looking at that system.

I haven't driven it yet. The summer opening cruise is on May 1st, so I'll have the car out from winter storage a few days before thet. I'll let you know.

That should really make the car handle. Nice pics. The only problem is you don't have power steering fluid dripping all over you in the one photo...

fvike,

Offbeat question. What type of floor are the snap together pieces i see in the pictures?

Thanks

I did that part today. ;)

They are Highland Garage Floor Pads. They are sweet, and if you spill some oil on them or whatever, just wipe it off, and you're good. Very durable.