Lateral-g Forums - GMR Chromolly Fabricated 9" Housing

GMR Chromolly Fabricated 9" Housing:
This Rear-end housing IS application specific. It was built & bracketed to be a "direct bolt in" for 62-67 Nova's with the DSE Quadra-Link rear suspension.

Wheel Mount Surface to WMS is 52-3/8" (recommended width from DSE for mini tubs/10" wheel/5"backspace)
This housing IS chromoly and tig welded (including all link brackets/etc.) Has Billet 2.5" filler/ring gear inspection Cap. This set-up currently has full floater snouts welded in either end to accept The GMR Billet Full Floater Hubs (which I would include for an additional fee). Also, this housing already has caliper brackets welded on to accept Wilwood Billet SL's (and or others) w/14" rotors.
BUT, at the fractional price of new that I am asking, you/I could cut off and install Big Ford Ends/etc. Oh, and this one also has adjustable shock mounts (which DSE housings/Brackets do not) to further adjust ride height!

New this set-up cost over $2,000.00! But you can literally bolt this one under your DSE Quadra-link/Mini-Tub equipped 62-67 Nova for $1300.00 obo
Mesa,AZ