Lateral-g Forums - PSI Conversions LS Harness

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- LSX Conversions (https://www.lateral-g.net/forums/forumdisplay.php?f=70)

- - PSI Conversions LS Harness (https://www.lateral-g.net/forums/showthread.php?t=43229)

ItDoRun

09-27-2013 08:09 AM

PSI Conversions LS Harness

Does anyone have any photos of a first gen Camaro with the PSI harness? I'm curious how the harness lays in the engine compartment and how clean it looks. I need to get my harness ordered next week.

Thanks,

Ron in SoCal

09-27-2013 08:23 AM

Chris I used PSI and would again. Take a look in my thread (tail end) and you'll see some pics. We did re-wrap it in the engine comaprtment, but no other mods.

Swain

09-27-2013 11:21 AM

I have the same deal also. I would love to see some pictures.

rickpaw

09-27-2013 12:15 PM

Here's a picture of PSI harness I used in my swap. I put the ECU behind the pass head lights and ran the main harness from the ECU inside the fender.

http://i616.photobucket.com/albums/t...ps4c512046.jpg

ItDoRun

09-27-2013 12:34 PM

No picture

Quote:

Originally Posted by rickpaw (Post 507355)

Bsinclair

09-27-2013 06:16 PM

1 Attachment(s)

i used a harness made by modern vintage and i'm really happy with how its made.. I mounted my ecu inside the car using a ironworks mount..

hud697

10-07-2013 07:24 AM

I used the harness from SSP on my dad's '55, i really liked the look of it better than my PSI. It had braided loom on the entire harness

jeremy30thz

10-12-2013 03:26 PM

Quote:

Originally Posted by Bsinclair (Post 507403)

i used a harness made by modern vintage and i'm really happy with how its made.. I mounted my ecu inside the car using a ironworks mount..

Looks good man, I will have a very similar setup if I can ever get started on it

mikeextrafast

10-17-2013 05:44 PM

what location are you guys installing the ecu ?

All times are GMT -7. The time now is 07:52 PM.