Lateral-g Forums
Page 1 of 4 1 23 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Parts for Sale (https://www.lateral-g.net/forums/forumdisplay.php?f=18)
-   -   Ford 9" Housing (https://www.lateral-g.net/forums/showthread.php?t=43719)

MillerBuilt 11-06-2013 06:50 PM
Ford 9" Housing
 
1 Attachment(s)
Mild Steel, Mig welded fabricated housing.

Extra Strong, Extra Light, and designed to minimize gear oil slosh and keep the gear oil where it belongs. Cleaning out the garage and need gone.
Attachment 42962

$500 plus shipping (located in Mesa, AZ)

*same rear housing that resides in JCG's "2nd Test Car" (see below)

http://i1015.photobucket.com/albums/...ps51b77e3d.jpg
[IMG]http://i1015.photobucket.com/albums/...ps4ef29338.jpg[/IMG]

Rick D 11-06-2013 07:53 PM
How wide is it and what size axle tubes??

MillerBuilt 11-07-2013 05:15 AM
9" Housing
 
Quote:
Originally Posted by Rick D (Post 515110)
How wide is it and what size axle tubes??
Rick, I will post exact width this evening when I get home to measure, but it is un-cut/full length and will accommodate the widest of car applications. Axle tubes are 3". Thanks, Jay

carbuff 11-07-2013 05:56 AM
While you are measuring, could you take a second dimension for me? Specifically how far is it from the furtherest rearward face of the center section to the back of the axle tube? My application is really tight there due to the Watts link mount, so that would be a critical dimension...

MillerBuilt 11-07-2013 07:25 AM
Quote:
Originally Posted by carbuff (Post 515139)
While you are measuring, could you take a second dimension for me? Specifically how far is it from the furtherest rearward face of the center section to the back of the axle tube? My application is really tight there due to the Watts link mount, so that would be a critical dimension...
Not a problem. Will let you know this evening. Jay

MillerBuilt 11-07-2013 04:50 PM
Quote:
Originally Posted by JSM (Post 515134)
Rick, I will post exact width this evening when I get home to measure, but it is un-cut/full length and will accommodate the widest of car applications. Axle tubes are 3". Thanks, Jay
Housing is approx. 53" end to end. So basically once housing end of choice (ie. torino end) are welded on, then brake package,,,, this un-cut housing would finish out with an approx. 61" WMS to WMS which is wider than any application I am aware of around here. Thanks, Jay

MillerBuilt 11-07-2013 04:52 PM
Quote:
Originally Posted by carbuff (Post 515139)
While you are measuring, could you take a second dimension for me? Specifically how far is it from the furtherest rearward face of the center section to the back of the axle tube? My application is really tight there due to the Watts link mount, so that would be a critical dimension...
Putting a straight edge along the back and butting the rear side of the axle tube measures approx. 4" Thanks, Jay

MillerBuilt 11-10-2013 04:26 PM
To The Top...

MillerBuilt 01-28-2014 07:09 PM
To The Top...

MillerBuilt 02-08-2014 07:43 PM
To the top....


All times are GMT -7. The time now is 12:10 AM.
Page 1 of 4 1 23 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net