Bill Goldberg's Hemi Dart chopped
 

Brent, aka '67Rally', was nice enough to chop this one I sent him. It's the ex-Bill Goldberg Hemi Dart (he had it built). I like the 4x4 stance being 'replaced' by a g-machine ride height.

http://i87.photobucket.com/albums/k1...psf773cfd7.jpg

to

http://i87.photobucket.com/albums/k1...psd9bd07e1.jpg

Glad to help. I think it looks much better dropped down like that.

oh, thats better.

add a chinspoiler and you got a winner.

Wood door pic is the orig.

Here's the lowest one.

http://i87.photobucket.com/albums/k1...psfc05ff71.jpg

Brent,

Thanks, I agree it needed that.:thumbsup:

If you don't mind, how about also trying one 50% bigger to compare when you get a chance?

Thanks.

Will do. That one I did is an off the shelf piece from Randy's Spoilers. I'll do a bigger one for you when I get a chance.

Do you want it the same length but taller, or both wider and taller?

Brent,

I believe it's wide enough.

But if it doesn't look right to you, try just a little wider.

But yes, make it say 50% taller.

Thanks much. :thumbsup:

3 quick and dirty ones. If you see one you like, I can clean it up or adjust as needed. I can also play with other shapes. Let me know what you like.

Taller:
http://i228.photobucket.com/albums/e...psd8b9f93b.jpg

Taller & Wider 1:
http://i228.photobucket.com/albums/e...ps9b7fa87f.jpg

Taller & Wider 2:
http://i228.photobucket.com/albums/e...pscaa6055c.jpg

Brent,

The 2nd one. :thumbsup:

Thanks.