Billet Clutch Master Cylinder Bracket
 

This is an awesome bracket, [email protected] I was wanting to know what master cylinder that is in the pic? Would this work with a TKO 600 and what hydraulic throwout bearing?

Hi Greg,

Yes, it will work with most manual transmissions as long as there is a hydraulic release bearing conversion available. Ram makes a nice hydraulic unit.

The master we use is from Wilwood but Tilton's with a 2.250 in bolt flange will work too. The one pictured is a Wilwood compact.

These are available just the bracket alone for the DIY people and we are putting together a partial kit which will include bracket, hardware, master cylinder, master shaft, shaft hardware, hoses.

The full kit will include the above along with hydraulic release bearing.

Pricing on the bracket alone is $130. Pricing on the partial and full kit coming soon.

We did a slight redesign so we could kit it to most GM and Mopar vehicles.

Vince, I'm interested in a full kit for a 72 Chevelle. I'll be running a T56 Magnum

I would prefer a kit for ease and no testing and trial fitting! Please update me when available as a kit and thanks for the reply.
Talk Later,
Greg