Lateral-g Forums - Bulkhead connectors

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Interior and Electrical (https://www.lateral-g.net/forums/forumdisplay.php?f=40)

- - Bulkhead connectors (https://www.lateral-g.net/forums/showthread.php?t=44725)

IndyNova

01-19-2014 07:13 AM

Bulkhead connectors

Hey guys, finally got my 6.0 ls motor installed in the nova , and I want to split the engine harness and install a bulkhead type connector so I only have to drill one hole in my firewall to route wires through. My problem is finding what I need. Any ideas on where I can find them at? Or, if anyone has a better idea of how to achieve this, i would appreciate any advice. Thanks

snappytravis

01-19-2014 09:53 AM

grommet

I bought a big two piece grommet from summit. I plan to drill a big hole in the center of the firewall then run my ecu wires through it. Then install the grommet.

Like this
http://www.summitracing.com/parts/SI...BL?seid=srese2

Just another idea for you, Good luck

raustinss

01-19-2014 10:34 AM

Molex, Delphi, metri....they all make bulkhead type connectors that you may want. I believe that DSE sells some and possibly ring brothers...or fesler
Good luck Ryan Austin

GregWeld

01-19-2014 05:50 PM

Quote:

Originally Posted by IndyNova (Post 530022)

Call Rodger @ Ironworks.... he uses "mil-spec" bulkhead connectors that are pretty slick.

ironworks

01-20-2014 12:10 PM

Quote:

Originally Posted by GregWeld (Post 530122)

Call Rodger @ Ironworks.... he uses "mil-spec" bulkhead connectors that are pretty slick.

Thanks Greg - They are on our website.

All times are GMT -7. The time now is 08:16 AM.