Lateral-g Forums - Stainless works headers

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- LSX Conversions (https://www.lateral-g.net/forums/forumdisplay.php?f=70)

- - Stainless works headers (https://www.lateral-g.net/forums/showthread.php?t=45125)

aany001

02-13-2014 05:56 PM

Stainless works headers

Guys I was wondering would a set of stainless works headers part# CALS1SB fit in a 69 camaro with an LS1 stock frame but with a rack? I have a set local to me and wondered if anyone knows if these would fit?
Thanks
Steve

Vince@Meanstreets

02-13-2014 06:40 PM

is it a rear steer rack or a brewer set up?

aany001

02-13-2014 09:31 PM

Vince it's a rear steer setup.

aany001

02-14-2014 08:06 AM

Just an update.... I picked them up and they fit great!!!

Blake Foster

02-14-2014 09:02 AM

that is interesting did you use a 2 or 3 joint shaft kit?
I know ours work Perfectly om the stock sub with the RACK or the 670 Steering box.

aany001

02-14-2014 09:39 AM

Blake I used a 2 joint setup. Also I have the engine set back 1 inch.

All times are GMT -7. The time now is 05:10 PM.