Lateral-g Forums - LS3 & LS7 Intake/Fuel Rails

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- EFI and Forced Induction (https://www.lateral-g.net/forums/forumdisplay.php?f=47)

- - LS3 & LS7 Intake/Fuel Rails (https://www.lateral-g.net/forums/showthread.php?t=45473)

LS3 & LS7 Intake/Fuel Rails

Does anyone know if a LS7 intake is any different than a LS3?

Thanks, Jay

Yes they are different

The port size is massively different. What heads do you have?
Make sure you get all the O-rings with the intake... those are pricey little suckers.

Quote:

Originally Posted by NvrDun71 (Post 540695)

Yes they are different

Thanks!

Quote:

Originally Posted by gnx7 (Post 540727)

The port size is massively different. What heads do you have?
Make sure you get all the O-rings with the intake... those are pricey little suckers.

That makes sense. I don't have the engine yet, but will just be a simple LS3 crate engine. I have/use a plastic mock up block that I was thinking of picking up a intake for so that I could continue to build around without having the actual engine. Saw a LS7 for sale and figured I might pick it up,,,, even though just for mock-up, I think I will pass since it will be a harder sale when I am done with it for mock up and want to off it. Thank you for time. Jay