LS7 Clutch Actuator adapter fitting
 

Now you can replace that easily damaged factory line and quick disconnect with an aftermarket fluid feed line to your LS7 type clutch actuator. If you are running an after market high volume clutch master cylinder you will need this hard to find item.

Simply remove your factory clutch feed line and install this fitting into your clutch actuator using your old orings and retainer clip. Now you can use an off the shelf 1/8" NPT adapter fitting or straight to an AN line with a 1/8" NPT hose end to connect to your aftermarket master cylinder. O-ring's, fittings and hoses sold separately.

Features a 3/4" hex flange and is CNC machined from 303 stainless and made here in USA.

Dealers wanted!! Email for special pricing.



ordering information here.
http://www.shop.meanstreetsperforman...ication_c2.htm

Nice piece! Well done :thumbsup:

Thank you Matt... let me know if you need anything. Dealer specials available.


For all you Dalek fans out there. The bots are in stock and ready to ship.

Very Nice! :flag2:

very cool. I know I will need a set for a car in the shop soon.

Looks great, thanks for doing that. :thumbsup:

You are a very good bloke :thankyou:

haaaa you package is going out in the morn bub.

Thanks again!!!!

Great, believe container leaves next week

Great dealing with you

C6 Cadi GTO
 

My o ring vendor boinked me and they wont be in till after the 4th. You will have to use your old o rings and retainer clip. Sorry bout that.

Just Becareful swapping your old ones. I use a tooth pick to pull em.