Lateral-g Forums - T56 LS1 Bellhousing

Page 1 of 2

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)

- - T56 LS1 Bellhousing (https://www.lateral-g.net/forums/showthread.php?t=46932)

Swain

07-21-2014 10:59 AM

T56 LS1 Bellhousing

Question my bell housing only had a hole for my hydraulic clutch line. No hole to get to the bleeder nut. Any ideas on what to do to bleed the clutch? Do I need to make a hole in the Bellhousing to get to it?

:bang:

Vince@Meanstreets

07-21-2014 01:30 PM

Quote:

Originally Posted by Swain (Post 561723)

what bell do you have? should have a slot cut out for it.

Swain

07-21-2014 01:53 PM

Pretty sure I got it from thegearbox.org. Its been a couple years.

Vince@Meanstreets

07-21-2014 02:10 PM

Quote:

Originally Posted by Swain (Post 561764)

Pretty sure I got it from thegearbox.org. Its been a couple years.

is it a stock f body type or an SFI bell?

Swain

07-21-2014 02:18 PM

looks like a stock F Body style. Its cast aluminum.

Vince@Meanstreets

07-21-2014 02:28 PM

1 Attachment(s)

should have a slot like

Swain

07-21-2014 02:33 PM

Thanks for the help. I will take some pictures tonight.

Swain

07-21-2014 08:48 PM

Quote:

Originally Posted by Vince@MSperfab (Post 561773)

should have a slot like

I found the hole haha:headspin:

Vince@Meanstreets

07-22-2014 02:15 PM

ain't going there, haaaa

OBeer-WAN-Kenobi

07-22-2014 03:25 PM

Quote:

Originally Posted by Vince@MSperfab (Post 562009)

ain't going there, haaaa

I was thinking the same thing. But if you found the hole when you were looking for the slot, I'm not sure that can be fixed.

All times are GMT -7. The time now is 09:26 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page